Thursday, April 9, 2009

after the bisque...




Unloaded the bisque firing. Lost 2 pieces because I was impatient and loaded them too wet... Sigh.... otherwise, all went well and I ended up with a whole buncha stuff to glaze. First, before glazing I wax 'em! The wax keeps any glaze from soaking into the bisqueware, very handy if you do not want your pieces melting into your shelves. Also handy if you have part of your mug that you do not want glazed, like the horns or teeth of a demon or the eyes of a particular critter. So the bottoms, horns and teeth got waxed tonight. Tomorrow I will glaze everything and load up the kiln for the glaze firing.

Wednesday, April 8, 2009

just to let you all know what goes into ceramics production...



So ceramics need to be fired twice (Yeah, I know, some people do it all in one firing, but that is too unpredictable for my tastes). The first of the firings is called a bisque firing, this takes out a good amount of the moisture, but is not hot enough to vitrify the clay. WHat you see loaded in the kiln is what is called greenware. That just means that the clay has been thrown and allowed to air dry. It is freakishly fragile at this stage and still makes me nervous to handle it. I fire it to cone 04 for my bisque firing, around 1925 degrees F. This is considered low firing. When someone says they use a low fire clay, it is in the range of cone 06- cone 1. It is the most common firing range for ceramics, but also leaves the piece relatively weak.
In a bisgue firing, since the clay is not vitrified or glazed, it is fine to have pieces touch each other or even be placed inside one another. Therefore I get a lot more in the bisque firing than I do in a glaze firing. I pack those bisques tight!
In my little Skutt Electric Kiln, this firing, done on a slow speed will take about 13 hours and about 65kwH of power. I then have to wait for it to cool down, which takes about another 18 hours or so depending on the outside temperature. SO at some point tomorrow, I will take pieces out to wax and glaze them. more on that tomorrow!

Monday, March 30, 2009

The Ochibos are coming!!

They are coming by the Hundreds to the MakerFaire in San Mateo this May in the lovely south bay area. You really should go to the Fair this year, I promise it will be so worth it.
When not at hte maker fair, they can be found resting and relaxing at OchiboEtsy!

Wednesday, March 25, 2009

Monster o'Mine

This is big. This is huge.

Monsters bags and backpacks are coming to your planet. You must take them to your leader. And also to the mall. And to your school. And to your office.

Wednesday, March 18, 2009

New monster stuff!



New monster plush on our Etsy store. We are constantly adding new ones so keep checking us out. Also added regularly are new neckwarmers, jewelry, and cloths all handmade by us. And now introducing, Willy, Bongo, Flo and Tangerine!

Tuesday, March 17, 2009

"there's one in all of us"

I realize that this blog is probably supposed to center around crafts and art, but the new poster for Where the Wild Things Are is out today and it makes my little monster loving heart squeal.

Big. Furry. Monster. Be still my heart.

(found at the meltdown comics blog.)

Friday, March 13, 2009

specimen7 and creatures from another world.

Hello! I'm a new member to the Monsters team, and I'm delighted to be here.

I make polymer clay monsters. The fiction behind them is that they were found in the basement of the late widow of a scientist(Dr. Charles Ellis) known for his research into other worlds - and bequeathed to the Center for OtherWorld Science.

The Center of OtherWorld Science is dedicated to researching and classifying the specimens found in the basement of the Ellis estate, despite the fact that Dr. Ellis' work was discredited during his life time.

So far, the Center's research has been inconclusive, due to incompetent management and lack of funding.

Here are some of the specimens which have been found so far -







There are more at the Specimen7 Etsy store, where the Center for OtherWorld Science is putting specimens up for sale to fund their research.